Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: no blockages

no blockages 11 years 7 months ago #116

  • Anonymous
  • Anonymous's Avatar Topic Author
  • Visitor
  • Visitor
not showing blockages, on any runs, with sensitivity set at 40, seeding peas

Please Log in to join the conversation.

no blockages 11 years 7 months ago #117

  • Anonymous
  • Anonymous's Avatar Topic Author
  • Visitor
  • Visitor
This sounds to me like a sensor creating a false seed rate and interfering with communications.

Stop the machine, turn everything off, including the fan.

Turn up the sensitivity (100) and keep a close eye on the display to find any sensors that are NOT showing blocked.

Bypass each sensor identified as faulty and continue the process until every sensor shows as BLOCKED.

With the sensitivity level set high, the loop with scan very quickly so you have to pay close attention.

If no sensors show blocked at this point, split the system by tower, and check each tower seperately.

Each sensor that does not show as blocked (shows seed flowing) must be removed from the loop.

Continue this process until every sensor has been checked.

Please Log in to join the conversation.

  • Page:
  • 1
Powered by Kunena Forum