TOPIC: CAN ART ISOBUS harness Power wiring on Quad Track
CAN ART ISOBUS harness Power wiring on Quad Track
8 years 8 months ago #1601
I checked the voltage on an add-on ISOBUS tractor harness and found 24 volts was applied during starting! This was because the wires were hooked up to the wrong battery and 12 volts was put on the ground wire to the ECU on the toolbar. The wiring in the ECU could burn as there is a connection internally to frame ground.
The proper place to connect to power on a quad track is shown in the picture.